People are highly dependent on energy nowadays. Hence, it is imperative that all facilities receive the power it requires reliably and efficiently. More importantly, it must be installed properly to avoid mishaps. Errors with the electrical connection and equipment can be extremely dangerous to anyone nearby. Appropriate arc flash analysis, applied safety practices and administrative controls can all help reduce the possibilities of arc flash injuries.
Arc flash is defined as an electrical explosion typically resulting from low electric resistance of the ground connection or another voltage phase in an electrical system. It occurs when the electrical current flows in between a separated line or two conducting surfaces. Some common causes include improper work processes, insulation features, human errors and accidental contact among other environmental factors.
Given with these facts, the National Fire Protection Association has established standards to ensure safety within the workplace. The Standard for Electrical Safety in the Workplace plays a major role in overall industrial safety measures which is designed to promote safety of the personnel and prevent possible equipment damages. Hence, it has to be followed religiously.
At present, arc flash synthesis and training are required in the electrical industry. Every company must facilitate training for the employees. Safety certification is required in every state before any entity can operate. This ensures that the workers fully understand and willingly apply the safety procedures they have to observe.
The heightened awareness of its risks have paved the way to the development of various methods aimed to protect the personnel. This includes modifying obsolete designs as the needs change, configuring electrical components and wearing PPE to name a few. However, specialists believe that de-energizing the equipment in personnel interaction is the best way by far to reduce such hazards.
Every employee is necessary to be trained not to work on any live equipment that is more than fifty volts. However, if it is very necessary for a personnel to work on energized equipment, it is highly recommended to always observe safe work practices prior to performing the job. These safe work procedures include using proper materials, wearing appropriate protective equipment and assessing risks from the results of expert analysis of the electrical equipment.
These procedures are designed to prevent any injuries resulting from an arc flash. Warning signs and appropriate labels are also helpful. Above all, only trained and qualified staff should be allowed to perform the most dangerous and critical functions. This does not only prevent issues from arising, but it also help contain the ill-effects of such incidents should it arises.
PPE is highly essential for every electrical work as well. This training program provides the personnel with the necessary information to prepare them for the hazards at bay. This is provided to the employees to increase awareness of the equipment and materials to be used to ensure safety. The PPE may include insulating gloves, flame-resistant clothing, face shield and headgear among others.
Workers and managements in this industry need to understand and perform arc flash analysis in order to prevent it and ensure safety. Understanding these things can provide ultimate protection from any electrical dangers and incidents. Most of all, following proper safety measures cost only a fraction of the effort when we perform our job.
Arc flash is defined as an electrical explosion typically resulting from low electric resistance of the ground connection or another voltage phase in an electrical system. It occurs when the electrical current flows in between a separated line or two conducting surfaces. Some common causes include improper work processes, insulation features, human errors and accidental contact among other environmental factors.
Given with these facts, the National Fire Protection Association has established standards to ensure safety within the workplace. The Standard for Electrical Safety in the Workplace plays a major role in overall industrial safety measures which is designed to promote safety of the personnel and prevent possible equipment damages. Hence, it has to be followed religiously.
At present, arc flash synthesis and training are required in the electrical industry. Every company must facilitate training for the employees. Safety certification is required in every state before any entity can operate. This ensures that the workers fully understand and willingly apply the safety procedures they have to observe.
The heightened awareness of its risks have paved the way to the development of various methods aimed to protect the personnel. This includes modifying obsolete designs as the needs change, configuring electrical components and wearing PPE to name a few. However, specialists believe that de-energizing the equipment in personnel interaction is the best way by far to reduce such hazards.
Every employee is necessary to be trained not to work on any live equipment that is more than fifty volts. However, if it is very necessary for a personnel to work on energized equipment, it is highly recommended to always observe safe work practices prior to performing the job. These safe work procedures include using proper materials, wearing appropriate protective equipment and assessing risks from the results of expert analysis of the electrical equipment.
These procedures are designed to prevent any injuries resulting from an arc flash. Warning signs and appropriate labels are also helpful. Above all, only trained and qualified staff should be allowed to perform the most dangerous and critical functions. This does not only prevent issues from arising, but it also help contain the ill-effects of such incidents should it arises.
PPE is highly essential for every electrical work as well. This training program provides the personnel with the necessary information to prepare them for the hazards at bay. This is provided to the employees to increase awareness of the equipment and materials to be used to ensure safety. The PPE may include insulating gloves, flame-resistant clothing, face shield and headgear among others.
Workers and managements in this industry need to understand and perform arc flash analysis in order to prevent it and ensure safety. Understanding these things can provide ultimate protection from any electrical dangers and incidents. Most of all, following proper safety measures cost only a fraction of the effort when we perform our job.
About the Author:
If you want to know more about arc flash analysis click www.csiengservices.com. Control Solutions, Inc. Is an engineering and consulting company providing designing and integrating industrial solutions, and more info is available at http://www.csiengservices.com right now.
Aucun commentaire:
Enregistrer un commentaire